ABS / PBT LSA Plus Module Double Sided 10 Pair Krone Module Normal Closed

10 Pairs KRONE LSA Distribution module normal closed Double side Module ABS or PBT

Description:

Mechanical Performance:
Plastic Material: Thermoplastic
(Fire resistance UL94-0)
GB/T 5169.7-1985 standard
Contact material: Phosphor bronze
Contact coating: silver plating (20 - 40uinch)
Color: Grey, Red, Blue
Pulling-out force not less than 25N
Life: more than 200 time

Specification:

1. Environment condition: -5-40 degree Celsius Relative humidity <85% (+30 degree Celsius)Atmospheric pressure: 70-106KPa
2. The modules are compatible with KRONE LSA-PLUS modules.The design ofcontacts basing on the principle of airtight contacting makes acompletely reliable connection between the contacts and wires
3. Size (H x W x D): 75mm x 21.5mm x 40.5mm (5 Pairs)
4. ulling-out force: tin bronze and silver plating (20-40 uinch), pulling-out force not less than 25N
5. Internal diameter of connection wire: 0.4-0.6 mm
6. The performance of anti-burn: PBT UL94V-0or anti-burn ABS UL94V-0,Combustibility achieved GB/T 5169.7-1985 standard
7. Insulated resistance: under standard atmospheric pressure ,Insulatedresistance no less than 1,000M ohm between the two disjunct connections
8. Intermediate resistance between the reed terminators: no more than 7mohm between intermediate reed under the standard examination condition
9. Intermediate resistance: no more than 3m ohm under standard examination condition
10. Dielectric strength: according to industry standard
12. Type: disconnection type
13. Life: durability 200 cycles

Applications:

High speed LAN and WAN systems,used to connect the Telecom and Data wires with punch down tools.

Specifications :

Why you choose us:

1. 30 years manufactory experience

2. OEM/ODM available

3. Steady product quality

4. Strict quality control

5. Strictly conform to CE,ROHS,UL certificate

6. Quick delivery time

Disconnection Contact:

S2 Disconnection modules use a two piece contact (normally closed), with a convenient disconnection feature. By inserting a disconnect plug into a wire pair, you can temporarily or permanently disconnect the circuit. A test Cord can be inserted into a pair to test each side (look both ways) of the circuit independently. This greayly accelerates fault identification. The centre contact point can also be used for monitoring or over voltage protection.

Connection Contact:

Connection Modules have a one piece contact providing a continuous link between permanent wiring and jumper wiring, giving provision for monitoring access and overvoltage protection.

Switching Contact:

Switching Modules house individual contacts and hence the circuits are disconnected when

idle. By inserting plugs, cords or over voltage protection, the circuits can be connected when

necessary.