High Speed, High Quality, Best Service

About Us
Factory Tour
Quality Control
Contact Us
Company News
Home ProductsSubscriber Terminal Block

DIN Rack Install Subscriber Terminal Block VX module With / Without Protection

DIN Rack Install Subscriber Terminal Block VX module With / Without Protection

  • DIN Rack Install Subscriber Terminal Block VX module With / Without Protection
DIN Rack Install Subscriber Terminal Block VX module With / Without Protection
Product Details:
Place of Origin: China
Brand Name: ANSHI
Certification: ROHS, ISO9001
Model Number: AS-STB-P-1
Payment & Shipping Terms:
Minimum Order Quantity: 200
Price: Negotiable
Supply Ability: 5000pcs/week
Contact Now
Detailed Product Description
Name: VX Module Environment Condition: 5-40 Degree Celsius ,Relative Humidity <85% (+30 Degree Celsius),Atmospheric Pressure, 70-106KPa
Plate: Silver 20-40uinch Pulling-out Force: Not Less Than 25N
Standard: GB/T 5169.7-1985 Material: Pc
Install: DIN Rack Protective: GDT
High Light:

vx module

,

telecom distribution box

Subscriber Terminal Block STB module with / without protection against over voltage
 

Applications and feature:

- STB is a high reliability connection module, designed to withstand all existing climates.

- Watertight by design, it provides the best service for the following applications:

- Interface boxes UG/Aerial/Networks

- Distribution points

-Customer termination devices

- Fits on DIN 35 rails

- Very compact, overall dimensions allow to replace existing won protected solution by a high reliability solution.

- No special tool required, only by a standard screw driver.

Range of the section: diameter 0,4… 1,2 mm
Diameter on the isolation: it is maximal 5 mm
The current-response characteristics: 20 A(10 A on each conductor) during not less than 10 min, without the deformation of the module
Insulation resistance  
“Dry” atmosphere: > 10 12 Ohm
“Moist” atmosphere (standard ASTM Of d618, procedure F): > 10 12 Om
Salt fog: (standard ASTM Of b117) > 10 10 Ohm
Immersion beside the water: (15 days before 3% solution Of naCI) > 10 10 0m
The contact resistance  
R of material + R of the contact cross connection + by R of the contact connection of the wires < 10 m
Increase in the contact resistance  
After climatic testings: <2,5 m
After 50 connections - turning offs: <2,5 m
Dielectric strength: >3 kV of direct current during 1 minute

 

Mechanical characteristics

Screw of the connection of the pair of the distributive wire: Special alloy Of zamac, [passivirovannyy], with the paint and varnish coat
Housing of the unit of the connection Transparent polycarbonate
the distributive wire: Housing: Polycarbonate, glass-reinforced, resistance to fire “VO”
Fitted contacts: Tinplated phosphor bronze
Contacts of the grounding: Alloy Cu - Zn - Ni - Ag
Contacts of the connection: Tinplated solid bronze
Sealing material before the lower part: The epoxy resin
Sealing material before the upper cable part: Silicon compound
Cover of the pair of the distributive wire: Polycarbonate
Housing of the insertable module: Polycarbonate, glass-reinforced, resistance to fire “VO”
Sealing material of the insertable module: Gel
The ring gasket: Elastomer EPDM
Spring: the stainless steel
Cable laying is the distributive wire: Thermoplastic rubber

 

Contact Details
Cixi Anshi Communication Equipment Co.,Ltd

Contact Person: lulu

Tel: +8618667824997

Send your inquiry directly to us (0 / 3000)